Ghost Immobiliser Fitter
Ghost immobilisers are among the most effective ways to safeguard your vehicle from thieves. They stop vehicles from starting until the correct pin code is entered. They can be used to remotely track a vehicle. These systems are becoming increasingly popular, and many insurance companies give discounts to drivers who have installed them.
It is tamper proof
The Ghost Immobiliser is an advanced security device that blocks your vehicle from starting until a unique PIN code is entered, or a beacon is present. The system is discrete and can be customised to fit your vehicle and makes it an efficient anti-theft device. It is essential to test your system following installation to ensure that it is functioning properly. By entering the PIN as you start the engine is a simple way to test that the system is installed correctly. Regular testing will help to identify any issues or problems that may be affecting the system earlier.
The system communicates directly with the ECU and will not allow your vehicle to start until you have entered the proper sequence. This can be done using the electronic buttons on the steering wheel or via an app that you can download on your smartphone. Its tamper-proof design as well as its low profile makes it difficult for thieves to locate or remove. It can also be used with beacons to determine the location of your vehicle. It's a great method to safeguard vehicles that have been modified or cars that are costly or are rare.
This tamper-proof device utilizes the buttons of your steering wheel to create an exclusive sequence only known by you. The sequence is computationally unattainable for thieves to guess, and it is easily modified with a secure reset code. It can be fitted in most automobiles and is simple to install with the aid of a technician.
After you have installed the device, you will need connect it to an electrical source and a grounding point. To determine the wires needed to connect the device, obtain the wiring diagram of your vehicle. To avoid short circuits and electrical damage, cover the connections with heat-shrink tubing or insulation. Make sure you check the installation of the device as well as its connections to ensure there are no signs of interference.
The Ghost 2 immobiliser cost can be set to Service/Valet mode in older vehicles that require battery isolation to carry out maintenance or service. This will disable the device with an individual pin code, preventing it from being turned back on by thieves.
It's wireless.
Contrary to other anti-theft gadgets, ghost immobilisers work silently and are not able to be recognized by thieves. They can be put in a wide range of vehicles to guard against hacking and key cloning attacks and attacks using signal relays. They also connect to the CAN network and are used to track a vehicle remotely. They can also send owners immediate notifications when their vehicle is stolen. Some insurance companies offer discounts for customers who purchase them. It is the most effective way to prevent car theft.
The Ghost II immobiliser offers a easy and affordable method to safeguard your vehicle from theft. ghost vehicle immobiliser is wireless and is compatible with a wide range of automobiles. It is weatherproof and tamper proof making it a good choice for any type of vehicle. It is backed by a three-year warranty. The Ghost II is unlike other security devices because it doesn't require additional wiring or other external components. Its unique pin code sequence guards your car against key theft and key cloning by blocking the engine from starting unless a special disarm sequence is entered. This sequence could range from one to 20 buttons, which means thieves will need to invest much more time trying to break the code before they are able to escape.
The Ghost II can also block signals coming from a key fob. It can detect when the key fob has been hack or copied, and then disable the engine by triggering an alarm. It also stops the use of signal relay devices, that are often used by organised car thieves to gain access to vehicles.
It is crucial to test the Ghost immobiliser system frequently to ensure that it functions properly. This will allow you to identify any issues early and address them before they become a serious issue. It is an excellent idea to test the system by entering the PIN code and then starting the engine as part of your routine vehicle inspections.
It is crucial that the immobiliser is mounted in a position that is not accessible by thieves. If you can, put the device behind your dash by using cable tie. Be sure that all connections are properly insulated and cannot be manipulated by thieves. It is also important to double-check the mounting location to ensure that it's secure.
It can be used with a range of vehicles.
The ghost immobiliser is a highly effective security device that can assist in stopping car theft. It works by preventing your car from starting until you enter the correct pin code. This code can be created by pressing the buttons on the steering wheel, door panel, or centre console. The immobiliser is safe from tampering and can be programmed by the owner at anytime. It also protects from hacking, key-cloning and other malicious activities.
It is suggested that you hire a professional to install the Ghost immobiliser. This is because the process of installation is complex and any errors can render the device useless or even damage your vehicle. Additionally, DIY installation can cause warranty cancellation for both the Ghost Immobiliser and your vehicle.
The wiring diagram of your model vehicle is the best place to start. This will provide a direction to locate the CAN H and L wires, which are the connections to the immobiliser. Note these wires after you have located them, to ensure they don't get accidentally disconnected during installation. Also, make sure you choose a reliable and safe grounding location for the system.
It is a good idea to test the immobiliser when the wires are connected to make sure that everything is working as it should. Enter the PIN code, then start your engine to determine whether everything is working. It is also a good idea to test the immobiliser regularly to ensure it continues to function as intended.
The ghost immobiliser has the advantage that it doesn't need keys or LED indicators. It can be disarmed with a specific sequence on your steering, door panel or the centre console. The immobiliser is also tamper-proof, and doesn't leave any trace of installation behind making it difficult for thieves to detect or disarm. It can also be used to improve the security of your vehicle in the event of an intrusion. Many insurance companies recommend it.
It is easy to install
The Ghost immobiliser is an advanced device that keeps your vehicle secure from the most skilled thieves. It stops your car from starting until a distinct PIN or sequence is entered with the key fob. This stops hackers from cloning or hacking, and even key theft. Thieves cannot steal your car. It also uses a number of other sensors to identify attempts to drive away and can notify the owner or the police in case of any tampering.
Installing a ghost-immobiliser can be difficult, particularly for those who have no prior experience in installing alarms or other security systems. The proper tools and materials is crucial to an efficient installation. A multimeter is useful to check electrical values. Insulation cable ties and tape are also useful for protecting connections. The user manual for the Ghost immobiliser offers specific instructions specifically tailored to the model of your vehicle and wiring.
During the installation process it is crucial to check the location of the CAN H and L wires to ensure that they are in the correct locations. They are vital for powering the immobiliser. Incorrect wiring could result in improper functionality or system failure. You should also mark the wires with a piece tape or labels to track the wires. Finally, you should identify a consistent source of 12V power as well as a grounding point.
Once you've identified the proper location, you can start building the ghost immobiliser. To avoid short circuits or a mistaken airbag deployment, you will need to shut off the battery first. The next step is to connect the wires. Follow the directions in the manual to ensure that the installation is safe and secure.
After you've completed the wiring, connect the Ghost immobiliser using CAN to the engine control unit. This will make it difficult for thieves to take away or disable the device, as it's directly connected to the control unit. It's also tamper-proof, and the only method to disable it is to enter the pin code is to enter a personal one. The pin code will only be known by the vehicle owner and installer.
You can also utilize the Ghost immobiliser to temporarily permit someone else to drive the car, such as when you are out of town on business or need service. This feature is referred to as the Service/Valet Mode, and it can be turned on using a key fob or mobile app.