Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN buses. ghost vehicle immobiliser and does not have LED indicators or key fobs and is hidden within the wiring of your vehicle.
The user can also disable the system temporarily by using Transport Mode when renting out their vehicle. This guide will take you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle from hacking, key cloning, and relay attacks. The system is linked directly to the ECU of your car and secured by a PIN code you set. It is inaccessible to thieves using diagnostic scanners and other advanced methods. It isn't able to be disabled using circuit cuts.
The system is easy to use, but professional installation is advised to ensure a perfect connection with the ECU of your vehicle. Installers who are approved by Thatcham can assist with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm system to complete your vehicle's security package.
To avoid the accidental deployment of short circuits or airbags The installer must first remove your battery. After that the installer is now able to begin work. Basic hand tools can be used to ensure precise connections. A multimeter is useful to verify electrical values. Cable ties and insulation tape are also essential for protecting connections and keeping wiring tidy. Lastly, the user manual offers specific instructions tailored to your Ghost Immobiliser model.
During the installation process, it's essential to choose a grounding point that's free of paint and debris. Installers must also ensure that the immobiliser's wires CAN H and the CAN L are connected to the correct ECU ports. Depending on the model, these wires could need to be soldered or plugged into. To ensure a stable and long-lasting connection, it is recommended that you choose a high-quality plug.
After the installation is completed, the customer can activate after the installation is complete, the customer can activate Transport Mode. This allows mechanics or valet parking to use the vehicle without knowing the pin code. The customer must press the icon for service on the dashboard five times within 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great option for those who rent their vehicles often through platforms like Turo. An immobiliser can lower insurance costs, as it significantly decreases the risk of theft.
Getting Started
If you're looking for a solution to protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser. It will stop your car from starting even when a criminal steals or copies the key. This is due to its advanced technology, which is designed to prevent the engine from running until the correct PIN code is entered.
The device is connected to the vehicle's bus network CAN which allows direct communication with the ECU. It uses existing buttons on the dashboard and wheel to create a unique sequence that only you know and makes it impossible for others to start your car. This is the best way to safeguard your pride and joy. It will not lose its value if you ever want to sell it.
Installing a ghost immobiliser can be a simple process, but it is important to follow the directions carefully to avoid electrical issues and system malfunctions. First, you must find and locate a permanent 12V power source as well as an adequate grounding point on the vehicle's chassis. After that, you are able to begin to connect the wires that will be used to activate the immobiliser. Use high-quality connectors, and soldering methods to create an effective connection. Also, make sure to protect the connections by insulating them with heat shrink tubing and insulation tape to protect them from electrical short circuits and other issues.
Once how much is a ghost immobiliser have been connected, you are able to connect the battery and begin the engine to check if the immobiliser is working. When everything is functioning correctly then you can put it in a safe location under the dash or somewhere else in the vehicle. Make sure you hide it well to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a high-quality deterrent for car thieves. It offers superior protection against key cloning, hacking and relay attacks. It isn't able to be disabled unless you know the code. The device is also simple to use and can be set into a service valet mode so that your automobile isn't activated if you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to prevent vehicle theft. It is directly connected to the vehicle's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your car. Contrary to other aftermarket systems which require the removal of circuit components, the Ghost Immobiliser doesn't interfere with the factory settings of your vehicle.
It's also totally undetectable by thieves using diagnostic scanning devices. This is because the system doesn't send and receive radio frequency signals and it relies on the CAN data to communicate with your ECU. Furthermore, it doesn't require any modifications to your vehicle's existing key fobs.
Enter your sequence for disarming (either two or one buttons) and then switch on the ignition of your car to use Ghost Immobiliser. The indicator will flash twice to confirm that you have entered the correct code. You are now able to start your vehicle and drive in a safe manner.
Once installed, the Ghost Immobiliser safeguards your vehicle against key cloning or hacking while preserving its value. In Transport Mode you can temporarily disable the Ghost Immobiliser when you need to hand your vehicle to service or valet park.
You'll need a constant power source (12V) as well as an earthing point to complete the installation of a Ghost immobiliser. Be sure that they are well-insulated and safe to touch. Cable ties are also suggested for bundling and secure the wires. This reduces the risk of theft by potential thieves. To avoid mistakes, double-check these points and mark them with labels or tape. It's recommended to examine all connections for signs wear and tear. Connections that are loose can cause malfunctions in the system, so make sure they're securely fixed and well-insulated. Finally, don't forget to test the Ghost Immobiliser after installation is complete. This will ensure that the unit is operating correctly and that all connections and insulation are secure. If you encounter any issues, be sure to resolve them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that connects seamlessly with your vehicle's ECU to prevent the motor from starting without authorization. Its cutting-edge technology protects your vehicle against hacking and key cloning as well as other common methods used by thieves to steal vehicles. The Ghost works in conjunction with existing alarm and tracking systems to offer the ultimate security for your car. The Ghost's unmatched features, paired with its secluded design, make it a popular choice for drivers who love cars and security-conscious drivers.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow every step of the installation procedure. The best way to begin is to consult the wiring diagram of your vehicle that serves as a guideline for locating and connecting the wires required. You'll then need to identify the grounding and power sources. Once you have located them, you will need to mark the points to make them easy to identify during installation. It's important to use high-quality materials and tools. Hand tools are essential to help you make precise connections. A multimeter will check electrical values, and ensure safety. Cable tie and insulation tape will keep all connections neat. Finally, a user manual will provide specific guidance specific to your Ghost model.
Before you begin installing it is important to test the system by entering the PIN code, then starting the vehicle. This will ensure that the immobiliser functions according to plan, and prevents unauthorised vehicle starts. car ghost immobiliser should be carried out regularly as part of your routine inspections of your vehicle to ensure that the system is always functioning properly.
Once the installation is complete Once the installation is complete, you can drive your car with confidence. The Ghost will keep your car and its contents safe from would-be thieves and ensure that no one can take off with your vehicle without the correct PIN code. The Ghost can also be linked with a tracker that is approved by Thatcham to detect any attempt to steal or tamper, allowing you to locate your vehicle if it's stolen.
The Ghost can be utilized in a variety of vehicles and is compatible with all major brands. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to learn more about our services and installation options. We are a TASSA Registered installer which guarantees that we adhere to the strictest standards and procedures for installing our products. This ensures customers insurance companies, customers, and law enforcement agencies that installations are performed safely and properly.