How to Install a Ghost Immobiliser
Ghost immobilisers are an effective deterrent against car thieves. By pairing this device with other security systems and remaining alert, you can build an effective defense against modern, technologically-savvy thieves.
A ghost immobiliser can protect your vehicle from key cloning, hotwiring and relay car theft by the needing a pin number to start the engine. It works by using buttons that are already present in your centre console or steering wheel, so it's not visible to thieves.
Identifying the Wires
With more and more vehicles being taken away without the owner's key, it's important to protect your vehicle. While thieves might be able to copy your key fob or even steal your car by hacking its system Ghost immobilisers provide an additional layer of security by blocking all signals coming from the key fob and making it impossible to start your vehicle without entering a PIN code.
You can install the ghost immobiliser on your own, however it is recommended to let a professional do the work. A professional with experience will know where to put the unit in, as well as how to connect it to the vehicle's wiring. Installation can be difficult, and it's important that the connections are made correctly to avoid damage or malfunctions.
To get the most effective results, it is recommended to work in a well-lit area and wear the appropriate safety gear. You should also go through the user's manual to become familiar with the wiring system. This will aid you in identifying the wires needed for the installation and make sure that you have the correct equipment and components to complete the job right.
After the wiring is connected, you are able to reconnect the battery and test the system to determine whether it's working properly. It is also important to ensure that the battery's connections are secure to avoid electrical issues. It is also important to label the CAN L and H wires with labels or tape so that you are able to keep track of them during the installation process.
If you wish to permit another person to drive your vehicle for a short period of time for a valet parking or when the vehicle is in for service, the Ghost Immobiliser can be set to Transport Mode. You can enter the code using the service button on the steering column, centre console, or door panels. Then, the Ghost Immobiliser will go into PIN code changing mode.
Some thieves try to circumvent an immobiliser that is ghostly by using jamming or spoofing devices to stop or send fake signals to the system. This can be avoided by investing in advanced anti-jamming technology and regularly monitoring your Ghost Immobiliser for signs of altering the system.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security device created to stop theft of cars. It uses innovative technology to detect and deactivate the engine when the correct PIN code is entered, thereby making sure that the vehicle is not stolen by thieves. The system is extremely efficient and discreet. It doesn't have any visible indicators to dissuade criminals. However, there might come an occasion when you have to take the unit off, whether for maintenance or upgrades, or even to sell your vehicle.
This process requires specialized tools and expertise, since you will be working using wires and bypassing specific factory components. Additionally, it is crucial to follow the step-by-step directions provided by the manufacturer of the ghost immobiliser. You should also seek advice from a professional mechanic or auto electrician particularly if you don't have any experience working on cars.
After identifying the wires and disconnecting them, it is important to verify the condition of your battery. Verify that the battery is clean and free of corrosion, and that all connections are secure. If needed, you may want to replace the battery to ensure that it is able to withstand the demands of a security system that is aftermarket.
After you have disconnected the wires, you can then remove the ghost immobiliser. Utilize strippers or wire cutters to remove the wires, making sure not to scratch the wires or their terminals. Make sure to label each wire to ensure that you are able to reconnect them properly in the future. If the wires were joined and you want to use a heat resistant tool to break the connection. To avoid short-circuits, it is important to wrap the wires with insulation tape or heat shrink tubing.
Reconnect the wires using the 12V constant power source. Use the fuse tap to secure the connections using a fuse. Connect the grounding wire with an adequate grounding on the vehicle's chassis.
After you have connected the wires, restart your vehicle and enter the PIN code. Then, try starting the engine again. If what is ghost immobiliser doesn't start, the ghost immobiliser has been removed successfully.
Making Connections
A ghost immobiliser can be an affordable way to increase the safety and security of your vehicle. It is connected to the CAN bus system inside your car, capturing signals and preventing the vehicle from starting until the correct PIN code is entered. It is nearly impossible to bypass. It's a great option for drivers who want extra peace of mind and security. In conjunction with a Thatcham Approved tracking system, it can also help to lower your insurance premium.
It is vital to find and study the wiring diagram of the vehicle model before you begin the installation. The diagram serves as a guideline for finding the wires needed to create precise connections. Utilizing the right connections or soldering techniques will ensure that the connection is long-lasting and secure.
The wires that connect the Ghost immobiliser to the CAN bus system need to be identified and connected correctly. It is recommended to use small pieces of tape or labels to identify the CAN H and CAN L wires, as this will prevent confusion during the installation process. The wires are positioned in different locations on every vehicle. It is crucial to look up the wiring diagram or other online sources to be able to identify them.
When the correct cables are connected After connecting the correct cables, power will be restored to the Ghost immobiliser. It is recommended to test the immobiliser's operation by starting the engine but not entering the PIN code. This will verify that the immobiliser has been installed correctly and working as intended. It is a good idea to test your immobiliser regularly and help to identify any issues or problems early on.
The ghost immobiliser can also be installed quickly and without modifying the wiring in your vehicle. It is also an excellent option for those who want to add extra security to their vehicles, since it can be used in conjunction with a Thatcham-approved alarm or tracker, which will send a notification to your smartphone or tablet when the vehicle is being altered.
Mounting the Unit
The Ghost immobiliser is a fantastic deterrent against car thieves, particularly when paired with the GPS tracking system. It uses buttons on the center console, doors and the steering wheel to create a unique sequence you are able to recognize. This stops your car from beginning. It is also weatherproof and tamper-proof. It also comes with a three-year guarantee and is recommended by a variety of insurance companies.
It is essential to follow the instructions when installing the device. While some people can handle the task by themselves, it's recommended to seek out a professional you are unsure. Wire strippers and multimeters are vital tools to determine the wiring and make precise connections. It's also an excellent idea to buy some insulation and electrical tape for protecting the connections from damage. It's a great idea test your device after installation is complete to be sure it works as intended.
Ghost immobilisers are a fantastic way to secure your vehicle particularly in areas that have high rates of crime. It can be paired up with an iPhone application for easy management and monitoring. It blocks key cloning, ECU-swapping, and other security threats. It's a popular option for car owners looking to protect their investment, and is easy to install.
The Ghost II immobiliser features a sleek design and a low-profile that makes it unnoticeable to thieves. It connects to your vehicle's CAN (Controller Area Network) and stops you from starting the engine without entering a pin code. The PIN code is generated by a unique sequence of buttons on the steering wheel or centre console, or on the doors and can be changed at anytime. The device is also tamperproof and has an GPS tracker that can assist police find your car in the event of a theft. It's a great choice to protect your vehicle from thieves and is Thatcham approved.