Ghost Immobiliser Fitting
Protect your vehicle from theft of keys, cloning and hacking with the world's first aftermarket CAN immobiliser. With the option to link to an Ghost app and GPS tracking system that can send you call alerts if your car is tampered with or stolen.
Installing an Ghost immobiliser is a breeze for a skilled technician. It is important to have the right tools and heat shrink tubing.
Getting Started
In contrast to physical security devices like wheel locks or car alarms, ghost immobilisers safeguard your vehicle without the use of LED indications or key fobs. Instead they connect directly to the ECU's CAN data network and can only be activated by entering a PIN sequence. This provides a much more secure level of security against key hacking, cloning, and even ECU swapping.
Therefore, the installation of a ghost immobiliser Birmingham must be completed with a high degree of agility and accuracy. It's like walking through a minefield. A single mistake could cause serious damage to your vehicle's circuits. To avoid this, it's crucial to be aware of the process of installation and prepare your vehicle appropriately.
First, you need to prepare the vehicle by taking out interior panels to make space for the immobiliser device. Once you've found the perfect location to hide it, secure it in place with cable ties to keep it from being removed or damaged. Then, clean up the wiring by tying loose wires and using insulation tape or heat shrink tubing to cover exposed connections. This will minimize the risk of short circuits that are not intended to be there, while improving aesthetics and reducing the chance of tampering from thieves.
Find a source of continuous 12V power as well as an earthing point for the ghost immobiliser. Once you've found these, test the power wires using a multimeter to ensure they are delivering a consistent voltage. Connect the CAN H and L wires from the immobiliser to the identified power source and grounding point.
It is essential to ensure that all connections are checked and examine the immobiliser to check for signs of corrosion. It is also important to test the system to ensure it is working properly by entering a PIN number and then starting the engine. This should be part of your daily routine since it allows you to spot any intermittent problems early. Regular testing will also help to improve the longevity of the device and ensure that it is operating at peak performance.
Preparing your vehicle
The installation of a Ghost immobiliser is a complex task that requires the right tools and understanding. A wiring diagram is crucial for finding the correct wires, establishing precise connections, and ensuring safety. A multimeter is a tool to test electrical values and guarantee security. Cable tie and insulation tape can be used to secure the connections and protect them from alteration. A user's manual will give you specific instructions specific to your Ghost Immobiliser model.
Once installed the ghost immobiliser will stop unauthorised engine starts by requiring that the owner input a unique PIN code sequence through existing buttons in the steering wheel or center console. The code can be changed at anytime by the vehicle owner by hand or remotely through a mobile app. The device is also silent and is unnoticeable to thieves since it does not emit radio frequency.
what is ghost immobiliser is connected directly to the vehicle's CAN bus. It is a network that communicates with all of the vehicle's electronic control units (ECUs). It intercepts signals generated by the ECUs and stops the engine from starting if it detects a false signal. The system is tamperproof and weatherproof, but it does not have LED indicators or key fobs to draw the attention of thieves.
It can be mounted behind or in a more obscure area to ensure that it isn't easily spotted by thieves and does not interfere with vehicle's performance. It could even be placed in a small container and makes it less likely to be spotted during an inspection by unscrupulous salespeople for cars.
Its stealthy operation, along with its integration into the vehicle's CAN-bus system, makes it an effective deterrent to modern vehicle theft techniques, such as signal relay attacks and key copying. Combining the system with other security measures will create a formidable barrier that will deter even the most persistent thieves. This is the reason why more insurance companies are now advocating or even requiring ghost immobilisers to be installed, as it will significantly lower the cost of insurance.
Making the Connections
In contrast to traditional security systems that are heard by thieves, ghost immobilisers operate in a quiet manner to prevent them from knowing when your vehicle has been switched on. They also block high-tech methods employed to steal vehicles, for instance, OBD port hacking. Installing them without leaving permanent marks on your car is an ideal alternative for those planning to sell the vehicle in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and advanced solutions to protect your car from theft. It disables your engine using the CAN data network and creates a unique PIN code that is difficult for criminals to guess. It can be fitted in various vehicles and works with many available features, including car alarms and GPS trackers and steering wheel locks and door lock bypass systems.
If you decide to go with a Ghost immobiliser, be sure to refer to the wiring diagram for your specific vehicle model to determine the wires that need connecting. Double-check their locations to make sure they are exact, and label them or tape them to help remember them. You will also need to locate a source of constant power (12V) and a grounding point for the system. Once these are in place, you can begin making the connections to complete the installation.
The ghost immobiliser will not allow your vehicle to start unless you enter a pin code through the buttons of the steering wheel or dashboard. This will stop ECU hacking, key cloning, and other techniques of theft. It can also be used with other Thatcham approved security devices such as alarms and tyre clips to provide your vehicle with an even higher level of protection.
As the UK automotive industry grows, and so do the options for protecting your car. There are so many ways that thieves can get into your vehicle and steal it, so it's important to take every precaution to prevent it from being stolen. That's why ghost immobilisers have become such a popular choice among responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from starting until a specific PIN code is entered. This makes it difficult for thieves to copy the key fob that you use to start your vehicle, and difficult to disable the system by hacking its electronic.
Ghost Immobilisers can also be utilized in conjunction with GPS tracking devices, which can help you track your vehicle's location and identify it in the event of theft. This feature isn't typically found in aftermarket security products however it is a great option to increase your vehicle's security and provide you with peace of mind.
In addition to providing enhanced security in addition to providing enhanced security, in addition to providing enhanced security, the Ghost-II immobiliser provides a simple user experience by eliminating the need for additional key fobs and devices. It has a simple and intuitive PIN code entry system that is seamlessly integrated into your daily routine. Additionally, it provides modes of deactivation and other features that allow you to temporarily disable the immobiliser valet parking or for servicing.
Get the tools you require and get familiar with the wiring of your vehicle. A basic set will allow you to make precise connections. A multimeter can be used to check electrical values. Insulation tape and heat-shrink tubing are vital to protect connections from short circuits. Cable ties can be used to secure wiring. It's also important to work in a place which is well-lit and wear safety gear when using electrical tools and components.
You should test the Ghost immobiliser after you have completed the installation to make sure it is working properly. First, you should try to start the vehicle without entering the PIN code. If this doesn't work, you will need to retest and inspect the connections more thoroughly.
In contrast to other security systems unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is much more effective than traditional physical deterrents such as wheel clamps or steering locks. It is TASSA approved and recognised by a few insurance companies, which makes it an investment that's cost-effective and can give you peace of mind you need.